Install Boot Usb Yosemite Chameleon

This very Detailed guide for installing a fresh /Clean version of OS X El Capitan 10.11 With Chameleon Bootloader using fully Vanilla Installation Method. Wurlitzer 165 Midi Files. It requires no experience and all basic installation steps are mentioned in this Guide. Chameleon is most popular booloader yet and very handy and easy to handle on Legacy System. But in Latest release of OSX it becomes very difficult for eveyone to use it. We will provide you each and every steps gonna make this guide very Easy and Clean for Every Age of Hackintosh User Especially NewComer's / Noob/NewBie. 0R Requirement: 1.At least 8 GB USB Drive 2.

Mac OS X Application 3. Latest revision of Bootloader Enoch Chameleon Bootloader 4. Essential Kext Now this guide starts:: Making or Preparing for USB installer Step 1: Open Disk Utility and select either your USB drive, on the right side select the Partition tab and click the Current layout and change it to 1 partition then click the Options button at the bottom and select GUID Partition Table, name it whatever you want (in the example I named mine as Untitled) and format it as Mac OS Extended (Journaled) Step 2: OSX El Capitan app in your Application folder, or Wherever you have it Step 3: Now open Terminal and Copy & Paste it in Terminal. Killall Finder This Command will Unhide /Enable Hidden files to view and you are able to do following workaround. Note: for Hiding Files again use NO instead of Yes Keyword in above command for Terminal. Step 3: Then open folder in the following order open “Contents”, open “SharedSupport”, open “InstallESD” / “InstallESD.dmg” Note: after opening InstallESD it will be mounted but there are some files hidden (“BaseSystem.dmg”, “AppleDiagnostics.dmg” and “BaseSystem.chunklist”, “AppleDiagnostics.chunklist” ), these files are need to be copy and pasted after restoring complete from “Install ESD” to USB drive.

Step 3: open the file BaseSystem.dmg, when the finder window popup close it. Step 4: open Disk Utility and select the volume of the USB drive select Restore from menu on right of Disk Utility, drag and drop “OS X Base System” to Source drag and drop USB Drive volume to Destination. Click restore and it will take couple of minutes to finish the operation see following Screenshot: Note::The pendrive volume name will be replace as “OS X Base System”, you can rename it if you want. Step 5: Open your USB navigate to “System” –>“Installation” and delete the file Packages symnlink file and then copy the folder “Packages” from the volume “OS X Install ESD” and replace it to your pendrive “System” –>“Installation” paste it in there Step 6: Now copy “BaseSystem.dmg”, “AppleDiagnostics.dmg” and “BaseSystem.chunklist”, “AppleDiagnostics.chunklist” from “Install ESD” to USB drive. Step 6: Installing Chameleon Bootloader Step 7: Now its time to add all the Essential to Extra/Extensions/ Folder. Essential Kexts: FakeSMC and NullCPUPowerManagement These are most essentail kext for EverySystem NullCPUPowerManagemen: if your PowerManagement is Working then its not required and Use your SSDT still strongly recommend to use it for First installation or USB Installation only. Step 6: Now you have to Configure your org.Chameleon.boot.plist file and Kernel.plist with Xcode or PlistEditor Pro or Else you like to Edit Plist files.

Apple released the new Mac OS X 10.10 Yosemite in the Mac App Store for everyone to download and install for free on October 16th, 2014, but downloading a 5+ GB file for each of your computers will take some serious time. The best thing to do is download it once and create a bootable install USB drive from the file for. Yosemite installation with Chameleon. On a separate USB flash drive whenever I want to boot. Update as soon as the DP1 install is over.

Kernel.plist =>/Extra/ kernel.plist and add option KernelBooter_Kext = Yes, you can do this just select a option when installing Enoch Bootloader like following ScreenShot: Org.Chameleon.boot.plist =>/Extra/org.Chameleon.boot.plist and Add option. CsrActiveConfig (Hex 0x00) (Binary 00000000) in Decimal is 0 CsrActiveConfig (Hex 0x03) (Binary 00000011) in Decimal is 3 CsrActiveConfig (Hex 0x65) (Binary 01100101) in Decimal is 101 CsrActiveConfig (Hex 0x67) (Binary 01100111) in Decimal is 103 Note: Before Installing Custom kext or applying Kext patches you are required to Disable SIP, Now your Installer is Almost Ready, just to boot with it. But if you have HDD with MBR Partition and Kernel (Kernel not Found ) related issue then you have to Apply Additional Workaround.

Additional Workaround (Optional Steps ) MBR Partition Map Patch for EL Capitan Mac OS X this patch is only required if your HDD is Formatted using MBR Partition Scheme instead GUID ( which is Natively Supported by Ma c OS X ) just you have to replace these files with system files thats it. 1.Download MBR Patch Files from Here 2.Extract zip files and Copy OSInstall.mpkg USB->System->Installation->Packages->OSInstall.mpkg Replace it with existing file. 3.Now again Copy the OSInstaller and Goto USB->System->Library->PrivateFrameworks->OSInstaller.framework->Versions->A->OSInstaller and Again Replace it with Now Done. Its Capable of Running on MBR Formatted HDD. Extracting OS X El Capitan Kernel First Download and install it.

Now Open Packages Folder Look for Essential.pkg Open it with Pacifist and Now Goto ->System ->Library ->Kernels ->Kernel and Extract it then copy it to USB Drive (OSX BaseSystem ) Install OS X El Capitan Recommended BIOS Settings: Motherboard with Legacy BIOS set your BIOS to Optimized Defaults, and your hard drive to AHCI mode. To access BIOS Setup, press and hold Delete on a USB Keyboard while the system is booting up 2. Load Optimized Defaults 3. If your CPU supports VT-d, disable it 4. Set HPET to 64-bit mode. Save and exit. Step 1: Install OS X El Capitan You’re almost done! All you need to do is boot from the USB drive and install!

For best results, insert the USB is in a USB 2.0 port. Turn on the computer 2. Press the hotkey to choose boot device (usually F12, F10, or F8) 3. Choose USB 4. At Chameleon boot screen, choose Boot Install OS X from USB ( Install OS X El Capitan ). For a new installation of OS X, you MUST erase and format the destination drive according to the following steps before continuing.

Select and open Install OSX,Then you arrive at the Installer, choose language. 7. When the installer asks you where to install, choose El Capitan, or your existing install. Upon completion, the system will automatically restart. Note: system drive isn’t bootable yet. Boot from the USB and Select your drive to Boot Post-Installation with Chameleon Bootloader The installation is complete, but the system drive isn’t bootable yet.

Boot from the USB again, this time choosing El Capitan. We will make it Bootable. 1.Download or Use Already Downloaded Enoch Installer Hurray!! You have Successfully it and Now you can Install Specified System Kexts like Audio, Ethernet, Video or else. For Installation of Kext you can Use For All-in-One Post-Installation Tool Use Note: Before Installing Custom kext or applying Kext patches you are required to Disable SIP, Now you have to Configure your org.Chameleon.boot.plist file and Kernel.plist with Xcode or PlistEditor Pro or Else you like to Edit Plist files. Kernel.plist =>/Extra/ kernel.plist and add option KernelBooter_Kext = Yes, you can do this just select a option when installing Enoch Bootloader like following ScreenShot: Org.Chameleon.boot.plist =>/ Extra/org.Chameleon.boot.plist and Add option. Hello Deepak, I installed according to the instructions that you describe.

The installation was completed successfully, but can not be explicitly loaded OS. Ejects error and freezes with the following message: System uptime in nanoseconds 770025751 How to solve this problem? My specification is as follows: Mobo: Asus P8H61 / USB3 GPU: NVIDIA GeForce GTX 650 1023 MB CPU: 3.4GHz Intel Core i3 Memory: 8GB DDR3. Question: What method should I choose for this computer? Clover (UEFI method or Legacy method) or Chameleon?

Thanks in advance Kosanovic. Hi, I’m a noob, I really would like to install this on my PC: Specs: ————————————————————————– mainboard: MSI H61M-P31 mainboard graphics: NVIDIA processor: Intel Core i5-3470 CPU @ 3.20GHz 4-core memory(RAM): 8.00GB DDR3 system: 64-bit operating system, x64 based processor ——————————————————————————- I followed all the steps to create a bootable USB, I inserted the USB into the computer, turned it on, held F12 then I pressed enter on OS X El Capitan it looked like it was working for a while then it had lots of kernel errors.

It stopped on: System uptime in nanoseconds: then a number. It never went past there. Here is a video that shows the errors on Youtube. I have a problem installing both boot loaders. Enoch doesn’t boot up after installing. Clover boots up but, I ended up with 4 Split screens.

Or 4 mini desktops. Have no clue why? Did not even touch video or display options. Asus K53E Laptop, iCore 3 Sandy Bridge, HM65 chipset, installed on external SSD drive on USB port, Windows 10 internal. I’m new to this so I’m dangerous, have had many kernel panics, recoverable and unrecoverable. Reinstalled about 20 times so far. How do I pick the correct selections?

Hi, thank you, I have a lot of questions regarding post install. Bootloader Enoch worked but I had put a kext in that caused panic. Had to reinstall. Then, afterwards I was able to finally install Clover through your MacPoison. That’s when the screen ended up with 4 desktops. I then reinstalled OS because screens are too small to read.

Didn’t know what caused the problem. 2 Bootloader MacPoison was cool but clover caused the screen splitting into 4 desktops. Otherwise it was nice. Don’t know why. Want to get this stable.

​ is a free download that comes to your Mac from the Mac App Store in the form of an installer that starts up automatically. If you follow the onscreen instructions, you'll end up with an on your startup drive. The process is quick, easy - and has a minor flaw. What if you want to perform a clean install, completely erasing your startup drive? Or perhaps you'd like to have the installer on a bootable USB drive, so you don’t have to keep downloading it every time you wish to upgrade one of your Macs? The answer is you can't, at least not if you follow the onscreen instructions. The problem is that the installer is deleted as part of the upgrade process.

This means you can't upgrade another Mac without downloading the installer again. It also means you don't have an easy method of performing a clean install because you don’t have a bootable copy of the installer. To correct this basic flaw, all you need to do is quit the installer when it automatically starts up after the download is complete, and then use one of two methods for creating a bootable USB flash drive that contains the OS X Yosemite installer. You can use a USB flash drive to create a bootable OS X Yosemite installer with this guide. Bluehill75 Getty Images Two Methods for Creating a Bootable Installer There are two methods for creating the bootable installer.

Although I prefer using a USB flash drive as the destination for the installer, you can use either method to create a bootable version of the OS X Yosemite installer on any bootable media, including hard drives, SSDs, and USB flash drives. The first method we covered makes use of a hidden Terminal command that can perform all the heavy lifting for you, and produce a bootable copy of the installer using a single command.

You'll find complete instructions for this method in the article: • There is also a manual method of performing the same process, using the Finder and Disk Utility. This article will take you through the steps to manually create a bootable copy of the OS X Yosemite installer.

Silvercrest Web Camera Driver 12021 Washington more. What You Need • OS X Yosemite installer. You should have already downloaded the installer from the Mac App Store. You'll find the download in the /Applications folder, with the file name Install OS X Yosemite. • A USB flash drive or other suitable bootable device. As I mentioned above, you can use a hard drive or an SSD for the bootable device, although these instructions will refer to a USB flash drive. • A Mac that meets the.

One final note: If you already installed OS X Yosemite onto your Mac, you may still wish to create a bootable copy of the installer as a troubleshooting tool, or to make additional Yosemite installations easier. In order to proceed, you'll need to re-download the Yosemite installer from the Mac App Store. You can force the Mac App Store to allow you to download the installer again by following these instructions: • All set? Let's get started. The ESD image file contains a bootable system that is used during the install process. Screen shot courtesy of Coyote Moon, Inc.

The process for creating a bootable copy of the OS X Yosemite installer follows these basic steps, which we'll describe in more detail below: • Mount the installer. • Use Disk Utility to make a clone of the installer. • Modify the clone to allow it to boot successfully. Mount the OS X Yosemite Installer Image Deep within the Install, OS X Yosemite Beta file that you downloaded is a disk image that contains all of the files you need to create your own bootable installer. The first step is to gain access to this image file.

• and navigate to /Applications. • Locate the file named Install OS X Yosemite. • Right-click the OS X Yosemite file and select Show Package Contents from the pop-up menu. • Open the Contents folder. • Open the Shared Support folder. • Here you will find the disk image that contains the files we need to create a bootable installer.

Double-click the InstallESD.dmg file. • This will mount the InstallESD image on your Mac's desktop and open a Finder window that displays the contents of the mounted file. • You may notice that the mounted image seems to contain only a single folder, named Packages. In actuality, there's an entire bootable system on the image file that is hidden. We need to use Terminal to make the system files visible.

If you don't know how to do this, you can use the instructions in the article below to make the files visible: • When you've done that, we can continue. • Now that the files are visible, you can see that the OS X Install ESD image contains three additional files:.DS_Store, BaseSystem.chunklist, and BaseSystem.dmg. We're going to use this Finder window in subsequent steps, so leave this window open. With all the files we need now visible, we can move on to using Disk Utility to create a clone of the OS X Install ESD image that we mounted on the desktop. Screen shot courtesy of Coyote Moon, Inc. The next step in the creation of a bootable copy of the OS X Yosemite installer is to use capabilities to create a clone of the OS X Install ESD image you mounted on your desktop in Page 2 of this article. • Launch Disk Utility, located at /Applications/Utilities.

• Make sure the target USB flash drive is connected to your Mac.​ • Select the BaseSystem.dmg item listed in the left-hand pane of the Disk Utility window. It may be listed near the bottom, after your Mac's internal and external drives. If the BaseSystem.dmg item is not present in the Disk Utility sidebar, you can drag it there from the Finder window that appeared when you mounted the InstallESD.dmg file on page 2.

Once the file is present in the Disk Utility sidebar, be sure to select BaseSystem.dmg, not InstallESD.dmg, which will also be in the list.​ • Click the Restore tab.​ • In the Restore tab, you should see BaseSystem.dmg listed in the Source field. If not, drag the BaseSystem.dmg item from the left-hand pane to the Source field​ • Drag the USB flash drive from the left hand-pane to the Destination field.​ • WARNING: The next step will completely erase the contents of the USB flash drive (or any other bootable device you dragged to the Destination field). ​ • Click the Restore button.​ • You'll be asked if you're sure you want to erase the USB flash drive and replace its contents with BaseSystem.dmg. Click the Erase button.​ • If requested, supply your administrative password and click OK.​ • The restore process will take a bit of time. Once it's complete, the Flash drive will mount on your desktop and open in a Finder window named OS X Base System.

Keep this Finder window open, because we'll be making use of it in subsequent steps. We're done with Disk Utility, so you can quit this app. All that's left to do is modify the OS X Base System (the flash drive) to make the OS X Yosemite installer work correctly from a bootable device. Screen shot courtesy of Coyote Moon, Inc. So far, we found the hidden image file within the Yosemite installer.

We created a clone of the hidden image file, and now we're ready to copy a couple of files that will make the bootable version of the OS X Yosemite installer work correctly. We're going to be working in the, with the two windows we asked you to keep open during the previous steps. It can get a bit confusing, so read through the following steps first, to make sure you understand the process. Modify the OS X Base System on Your Flash Drive • In the Finder window named OS X Base System:​ • Open the System folder.​ • Open the Installation folder.​ • Within this folder you'll find an alias named Packages. Delete the Packages alias by dragging it to the trash, or by right-clicking the alias and selecting Move to Trash from the pop-up menu.​ • Leave the Installation window open, because we'll use it below.​ • Open the Finder window named OS X Install ESD. (If you didn't leave this window open from the earlier steps, follow the instructions on Page 2 to bring the window back.)​ • From the OS X Install ESD window, drag the Packages folder to the Installation window you left open above.​ • From the OS X Install ESD window, drag the BaseSystem.chunklist and BaseSystem.dmg files to the OS X Base System window (the root level of the USB flash drive) to copy them to the flash drive.​ • Once the copying is complete, you can close all of the Finder windows. There's one last step.

Earlier, we made invisible files and folders visible. It's time to return those items to their original invisible state. Follow the instructions in the article below (under the heading 'Hide the Clutter') to return your file system to its normal state: • Your USB flash drive is now ready to be used as a bootable OS X Yosemite installer.

You can boot from the Yosemite installer you just made by inserting the USB flash drive into your Mac, and then starting your Mac while holding down the option key. This will present the Apple boot manager, which will let you select the device you wish to start up from.